COMPACT FLAT SN10+

COMPACT FLAT SN10+

PnS EPVH1000(G) V0 Fuse,Holder 1000V - 20 Pieces/Pack

PnS EPVH1000(G) V0 Fuse,Holder 1000V - 20 Pieces/Pack

COMPACT FLAT Z+

The COMPACTFLAT Z+ makes it possible to achieve the maximum utilization of a flat roof
plane for the first time and is of great significance to large-scale projects for this reason. By
contrast, up to 30% more PV modules can be instal...

AED0.00
Availability: In stock
Delivery Time: 2 to 4 weeks
SKU
COMFLATZPLUS

AERODYNAMIC. STABLE. INTELLIGENT.


Compact and tested substructure for the two-sided stand-­
mounting of PV modules on flat roofs


The COMPACTFLAT Z+ makes it possible to achieve the maximum utilization of a flat roof
plane for the first time and is of great significance to large-scale projects for this reason. By
contrast, up to 30% more PV modules can be installed on the same surface. Furthermore, the
COMPACTFLAT Z+ system enables the efficient use of cleaning robots, since up to a max.
of 4 PV modules can be fixed down in a row. The aerodynamic design boasts excellent struc-
tural properties and requires considerably less ballast than other systems on the market.
More detailed information about our FLAT Z+ group can be found on our homepage.

More Information
Application

Ground/ Flat Roof Top 

Technical Specification
Module dimensions: 950–1050 mm any width, length
Mounting Tilt: 5°, 10°
Inter-Row Spacing: COMPACTFLAT Z4+: 400 mm for 8 modules COMPACTFLAT Z3+: 400 mm for 6 modules COMPACTFLAT Z2+: 400 mm for 4 modules
Space to the ground: approx. 85 mm, may be less on gravel roof
Distance from roof edge: 500 mm, roof areas F and G according to EN 1991-1-4 can be used
Roof Height: max. 60 m (adjustment to taller buildings upon request)
Max. Roof Slope: Up to 5° possible without roof anchors, over 5°only with roof anchors
Max. array size: 12 x 24 rows, 288 modules
Min. field size: 1 double row each 2 modules
Windload: 2 (kPa)
Snowload: 2
Dimensioning / stability verification: Software-supported based on wind tunnel testing
Write Your Own Review
You're reviewing:COMPACT FLAT Z+

The CompactFLAT Z+ is an aerodynamic “EAST/WEST base structure” for attaching and aligning framed PV modules on flat roofs. It is available in 5° and 10° tilts.

CompactFLAT Z+ makes it possible for the first time to achieve maximum utilization of flat roof space, making it important especially for large projects. Up to 30% more PV modules can be installed in the same area.