More Views

Sharp NU-AH340H

Availability: In stock

Company Info:


Sharp has been working on solar energy since 1959 and a global driving force in the research and development of photovoltaics. Sharp PV modules are installed in private homes, in public buildings and apartment blocks, in satellites, in lighthouses, in road traffic and industrial applications.



Product spec (general):


330W | 72 cell | 37.8V Vmpp | 8.73A Imp  | +ve power tolerance of 0~+5% | 16.5% efficiency



Product spec (mechanical):


1654 X 989 x 35mm (lXwXt) | 22.2kg | Anodized Aluminium Alloy frame | IP 67



Certifications:


TÜV | IEC/EN61215 | IEC/EN61730 |Safety class II/CE Application class A | DIN EN 13501-1 (class E)
MCS accredited product | Ammonia test passed (DLG focus test) | Salt mist test passed (IEC61701)



Warranty:


The warranty period for material defects and workmanship is one year from date of purchase. Sharp warrants that if the photovoltaic module produces a power output* of less than 90% of the minimum power output specified in Sharp’s written specifications during the first ten (10) years, or less than 80% during the period of twenty five (25) years from the date of original purchase and that the power output loss is due to faults in materials or manufacture, then Sharp, will repair, replace or augment the module to bring the aggregate power output to the warranted percentage of specified minimum power output.



Click here for Datasheet

Availability: In stock

OR

Company Info:

Sharp has been working on solar energy since 1959 and a global driving force in the research and development of photovoltaics. Sharp PV modules are installed in private homes, in public buildings and apartment blocks, in satellites, in lighthouses, in road traffic and industrial applications.

Product spec (general):

330W | 72 cell | 37.8V Vmpp | 8.73A Imp  | +ve power tolerance of 0~+5% | 16.5% efficiency

Product spec (mechanical):

1654 X 989 x 35mm (lXwXt) | 22.2kg | Anodized Aluminium Alloy frame | IP 67

Certifications:

TÜV | IEC/EN61215 | IEC/EN61730 |Safety class II/CE Application class A | DIN EN 13501-1 (class E)
MCS accredited product | Ammonia test passed (DLG focus test) | Salt mist test passed (IEC61701)

Warranty:

The warranty period for material defects and workmanship is one year from date of purchase. Sharp warrants that if the photovoltaic module produces a power output* of less than 90% of the minimum power output specified in Sharp’s written specifications during the first ten (10) years, or less than 80% during the period of twenty five (25) years from the date of original purchase and that the power output loss is due to faults in materials or manufacture, then Sharp, will repair, replace or augment the module to bring the aggregate power output to the warranted percentage of specified minimum power output.

Click here for Datasheet
Electrical data (STC)
Maximum power Pmax - 340 Wp
Open-circuit voltage Voc - 46.6 V
Short-circuit current Isc - 9.49 A
Voltage at point of maximum power Vmpp - 38.2 V
Current at point of maximum power Impp - 8.90 A
Module efficiency nm - 17.5 %
STC = Standard Test Conditions: irradiance 1,000 W/m², AM 1.5, cell temperature 25 °C.
Rated electrical characteristics are within ±10% of the indicated values of Isc, Voc and 0 to +5% of Pmax (power measurement tolerance ±3%).
Reduction of efficiency from an irradiance of 1,000 W/m² to 200 W/m² (Tmodule = 25 °C) is less than 3%.

 

Electrical data (NOCT)
 Maximum power Pmax  - 247.8 Wp
 Open-circuit voltage Voc - 43.4 V 
 Short-circuit current Isc - 7.63 A 
 Voltage at point of maximum power Vmpp - 35.0 V 
 Current at point of maximum power Impp - 7.08 A 
Electrical values measured under nominal operating conditions of cells : 800 W/m² irradiance, air temperature of 20 °C,
wind speed of 1 m/s. NOCT : 45 °C (nominal operating cell temperature).
Features

• Guaranteed positive power tolerance (0/+5%)

• Monocrystalline silicon photovoltaic modules

• Portrait or landscape mounting

• Tested and certified TÜV, IEC/EN61215, IEC/EN61730

• Safety class II / CE

• Application class A

• Fire rating class C Robust product design PID resistance test passed Salt mist test passed (IEC61701)

• 5 busbar technology Improved reliability Higher efficiency Reduced series resistance

My Product Reviews

You have submitted no reviews.

Write Your Own Review

You're reviewing: Sharp NU-AH340H