Schneider 8548E

Solar Off Grid Solution for Commercial/Industrial 

Device short name XW+ 8548 E
Inverter AC output (standalone)
Output power (continuous) at 25°C 6800 W
Overload 30 min/60 sec at 25°C 8500 W/12000 W
Output power (continuous) at 40°C 6000 W
Maximum output current 60 seconds (rms) 53 A
Output frequency (selectable) 50/60 Hz
Output voltage 230 Vac
Total harmonic distortion at rated power < 5%
Idle consumption search mode < 7 W
Input DC voltage range 40 to 64 V (48 V nominal)
Maximum input DC current 180 A
Charger DC output
Maximum output charge current 140 A
Output charge voltage range 40 – 64 V (48 V nominal)
Charge control Three stage, two stage, boost, custom Three stage, two stage, boost, custom
Charge temperature compensation Battery temperature sensor included Battery temperature sensor included
Power factor corrected charging 0.98
Compatible battery types Flooded (default), Gel, AGM, Lithium ion, custom* Flooded (default), Gel, AGM, Lithium ion, custom*
Battery bank range (scaled to PV array size) 440 to 10000 Ah
AC input
AC 1 (grid) input current (selectable limit) 3 – 60 A (56 A default)
AC 2 (generator) input current (selectable limit) 3 – 60 A (56 A default)
Automatic transfer relay rating/typical transfer time 60 A/8 ms
AC input voltage nominal 230 V +/- 3%
AC input frequency range (bypass/charge mode) 45 – 55 Hz (default) 40 – 68 Hz (allowable)
AC grid-tie output
Grid sell on AC1 (max) 6.0 kVA
Grid sell current range on AC1 (selectable range) 0 to 27 A
Grid sell voltage range on AC1 205 to 262 Vrms (auto adjust entering sell mode)
Grid sell frequency range on AC1 48 to 51 Hz (auto adjust entering sell mode)
Grid sell power factor range (lead/lag) 0.5
Efficiency Peak 95.8%
Operating air temperature range -25°C to 70°C (-13°F to 158°F) (power derated above 25°C (77°F))
Warranty (depending on the country of installation) 2 or 5 years 2 or 5 years