SMA Md.Sen-40 Sensor Interface

SKU
SMAOTH10205
AED551.15

*Price mentioned here as per Ex. w/h, Jebel Ali, Dubai and exclusive of shipping cost. We will update you the shipping cost as we proceed with your order.

Description:

SMA Md.Sen-40 Sensor Interface As Retrokit For:Stp 50-40 (Sunny Tripower Core 1).

Delivery Time:

2 to 4 weeks

SMA Md.Sen-40 Sensor Interface As Retrokit For:Stp 50-40 (Sunny Tripower Core 1).The sensor module allows you to record environmental data such as solar irradiation and cell temperature to analyze system performance. This means that any PV system malfunctions can be detected quickly and yield loss minimized. The SMA Sensor Module allows you to connect sensors that measure ambient temperature or wind speed and also provides a simple display for an S0 energy meter. Suitable for STP 50-40 (Sunny Tripower CORE1) inverter ONLY.

General Data
Mounting location : In the inverter
Voltage supply : Via the inverter

Ambient conditions for storage/transport
Ambient temperature : -40°C to +70°C
Relative humidity, non-condensing : 4% to 100%
Maximum height above mean sea level : 3000 m

Ambient conditions during operation
Ambient temperature : -40°C to +85°C
Relative humidity, non-condensing : 4% to 100%
Maximum height above mean sea level : 3000 m

Temperature inputs
Quantity : 2
Measuring shunt Platinum sensor Pt100, platinum sensor Pt1000
Type of measurement Two-conductor connection technology, fourconductor connection technology
Measurement range -40°C to +85°C
Typical measurement accuracy ±0.3°C when measured with four-conductor
connection technology
Maximum measurement error ±1.7°C when measured with four-conductor
connection technology

Analog input / current or voltage input
Quantity : 1
Measurement range of the voltage input : 0 V to 10 V
Input resistance of the voltage input : 100 kΩ
Measurement range of the current input : 0 mA to 20 mA
Load resistance of the current input : 450 Ω
Typical measurement accuracy : ±0.3 %
Maximum measurement error : +2.0 %
Maximum cable length : 30 m

Supply voltage for irradiation sensor
Quantity : 1
Output voltage : 24 VDC
Maximum power consumption : 600 mW

S0 interface
Number of wires : 2-conductor connection
Maximum cable length : 30 m
Maximum output current at 1 Ω load : 27 mA
Output current at 800 Ω load ≥10 mA
Maximum open-circuit voltage : 16.5 V

 

  • for ambient temperature
  • for wind speed
  • Light Weight
  • Easy To Install